Showing posts with label mirror fill. Show all posts
Showing posts with label mirror fill. Show all posts
Thursday, November 7, 2013
Comparison of conventional and telescopic heliostat fields at the same tower height
Take for example the 160 m tower height of the solar plant now under construction in Crescent Dunes, Nevada. A telescopic heliostat field with beam-down optics topping out at a height of 160 m would have a heliostat field radius of 2225 m, and 81% mirror fill, giving an approximately 1.3 GW solar plant instead of the 110 MW the plant being built at Crescent Dunes. Significantly, with telescopic heliostats, this full-sized power plant would be ground-mounted rather than on a tower.
The radius/tower ratio of 14 for a field of telescopic heliostsats was calculated in a previous post.
The mirror fill of 81% for a field of telescopic heliostats was estimated as follows.
The packing efficiency of circles in a hexagonal arrangement on the plane is 0.907. Taking the mirror fill in the solid phase of the heliostat field to be 90%, the previous calculations assumed the mirror fill in the outermost ring of heliostats would be 0.6 of this value or 54%, so, on average, the mirror fill in the gas phase of the heliostat field will be roughly the mean of 54% and 90%, or 72%. Since the gas and solid phases of the heliostat field have equal areas, overall the mirror fill is the mean of 90% and 72%, or 81%.
Subscribe to:
Posts (Atom)
