Showing posts with label solar power. Show all posts
Showing posts with label solar power. Show all posts

Thursday, March 6, 2014

Uniform illumination: the inverse problem of solar beam-down optics

The design of solar beam-down optics is closely related to the following lighting problem:

Given a light source that is a horizontal, incandescent disk, design a luminaire to uniformly illuminate an annulus-shaped parking lot.

This problem is the ray-reversed version of collecting light uniformly from a heliostat field and concentrating all of it onto a circular target. Though we might like to add some more constraints to correspond more exactly to the properties of a field of telescopic heliostats, getting to an optical design that simply provides uniform illumination would be a big first step, illuminating in more ways than one.

The distribution of light from an incandescent disk is Lambertian, which means the disk appears just as bright no matter what angle we observe it from, but we do not have to utilize all of this light. Placing over the incandescent disk an oblate ellipsoidal mirror that images the edge of the disk back onto itself will return nearly all of the emitted light back to the disk. Since there is such an oblate ellipsoid profile passing through every point in space, we can truncate our luminaire wherever need be, switching at that point to the profile of an oblate ellipsoidal mirror, and thus preventing any unnecessary loss of light.

Looking at the inverse problem makes it obvious that we do indeed have here the degenerate case where lens and object share an axis of rotational symmetry—the object we are imaging is the oculus. So we are free to design with Veselago lenses and then use Fresnel mirror optics to precisely emulate them.

Wednesday, March 5, 2014

Fresnel-mirror Veselago lenses in solar beam-down optics


The vine above is of a POV-Ray ray-tracing of a spherical Veselago lens, that is, of a sphere with internal refractive index -1. Veselago lenses are well known in metamaterial optics, but a negative refractive index may sound impractical at large scale. As pointed out in an earlier post, Fresnel mirrors with 90-degree facets, under certain symmetry conditions possess exactly the same optics as Veselago lenses. Those particular Fresnel mirrors also have other attractive properties such as zero chromatic aberration, no thermodynamically imposed loss of radiance, identical facet angles, analytical lens profiles (the same as for any refractive lens) and easy ray tracing (in POV-Ray you use "interior { ior -1.0 }".) POV-Ray scene description file here.

One way to describe the optical action at a point on a surface is to center a small sphere on that point and speak in terms of where the incident and exiting rays cross the sphere. If the sphere is infinitesimally small, the surface intersects it in a great circle that we may call its equator. The action to  of an n/-n refractive interface, and thus the action of a Veselago lens, is now easy to describe: an incident ray that enters the sphere at a point A, will exit the sphere at a point A' that is the reflection of A about the equator. A Fresnel mirror facet mounted on the same surface at the same given point can now be characterized by the point M where its outward surface normal exits the sphere. The action of the Fresnel mirror facet is also easily described: an incident ray that enters the sphere at a point A, will exit the sphere at a point A' that is the reflection of A about the point M (i.e., the 180-degree rotation of point A around point M.) Since reflection about a line (mirror reflection) is different from reflection about about a point (180-degree rotation about a point,) no arrangement of Fresnel mirrors is equivalent to a Veselago lens. However, symmetry can create a degenerate case where these two different operations cannot be distinguished. That case is when both the lens and the object being imaged share an axis of rotational symmetry.

In the degenerate case, where both the Veselago lens and the object being imaged share the same axis of rotational symmetry, reflection about a point and a line become indistinguishable, and a Fresnel mirror with 90-degree facets can precisely emulate a Veselago lens.

For example, the yellow circle in the animation above shares an axis of rotational symmetry with the Veselago lens above it, therefore its image is behaving exactly as it would under a spherical Fresnel mirror having 90-degree facets.

Friday, February 28, 2014

Is beam-shaping necessary?

A Fresnel Veselago lens, without any beam-shaping, can produce an annular focal zone of modest concentration from a solar highbeams field.

Beam-shaping (reshaping divergence) at the Fresnel Veselago lens can potentially produce very high concentration at the oculus—and thus reduce thermal losses from the hot space—but this would come at a cost of complexity and reflection loss. Is this a marginal improvement we could postpone for later?

Since reflection losses in beam-shaping with lenticular lens arrays will probably subtract at least of 5% of the total power, and improving concentration at the oculus by a factor of four would reduce the radiant heat percentage, q, by the same factor, the improvement offered by beam-shaping is something like

0.75q - 0.05.

Assuming we would put off for now a 10% improvement in system power in the interest of simplification, that is, if:

0.75q - 0.05 < 0.1,

or q < 20% .

Radiant flux in the hot space at the 3/4-full temperature of 1936 °K is 800 suns (calculations included in the figure above too-generously assume radiant transfer at the empty temperature of 1250 °C = 1523 °K) this becomes a 20% loss when the incident flux is 4,000 suns. From the diagram above it looks like that is probably about four times more concentration than can be achieved at an annular focal zone without divergence reshaping. Adding a 2D CPC concentrator to the annulus or 2D radiation traps for thermal radiation escaping at wide angles might effectively double the concentration at the annulus to 2,000 suns, but that would still leave us a factor of two away, and we would really rather be at 8,000 suns so that heat loss is reduced to 10%.

A better approach is to bring light directly to a circular focal zone. Calculations in the diagram suggest we can get above 3500 suns without beam-shaping, and additionally we can  block much of the radiant heat loss by suspending an elliptical mirror over the oculus. (Sunlight is shown directly striking the boiler tubes, but this could be avoided by slanting the tubes, arranging them on the inside of a cone rather than a cylinder.)


A Fresnel Veselago lens, without any beam-shaping, can produce a circular focal zone with high concentration.

Is beam-shaping necessary? Likely not.

Wednesday, February 26, 2014

Improved model of thermal flux on the glass lake thermal storage unit

Thermal flux values at glass lake thermal store.
This design reduces the thermal flux at the boiler's water wall to 210 suns, the discharging flux at the lake surface is smaller than that because the lake has 1.5 times the area of the water wall. A much wider range of temperatures is used this time, 550 °C (1250 °C - 1800 °C) but the thermal stratification that occurs during charging allows only about 52% utilization of the glass lake's theoretical storage capacity. The depth of the glass lake and its optical absorption length are both 8 m. Two thirds of the peak solar power of 7.5 GWth goes to storage, giving a plant capacity factor of about 0.75.


Friday, February 21, 2014

Direct solar absorption and storage in a molten glass thermocline

At high temperature, the effective thermal conductivity of molten glass becomes dominated by its transparency in the UV-to-2-micron passband. In the previous post it was calculated that molten glass at 2000 degrees K, with a 1/e (i.e., -4.3 dB) absorption length of 1 meter in the UV-to-2-micron passband (a loss rate of 4300 dB/km) would have an effective thermal conductivity of about 456 W/m-°K. The correlations for molten glass reported by Laurent Pilon et al., summarized in this chart, indicate an effective thermal conductivity of molten soda-lime glass at 2000 °K of 137 W/m-°K. From that value it can be estimated that the 1/e absorption length of soda-lime glass of commercial purity is about 137/456 m = 0.3 m. That is a figure that comports with everyday experience (e.g., looking through a glass panel edgewise.)


Thermophysical properties of molten glass at high temperature, including effective thermal conductivity, calculated from correlations in Laurent Pilon et al.


Absorption in the UV-to-2-micron passband of glass is almost entirely due to metal ion impurities, mainly iron. Thus improving the purity of ordinary glass by a factor of ten would extend the absorption length to 3 meters and increase effective thermal conductivity to about 1400 W/m-°K—about three times the room-temperature thermal conductivity of silver.

High effective conductivity also suppresses natural convection since natural convection starts out as a wiggle in an isotherm that enlarges by gravitational instability—despite viscosity slowing it down—faster than it can be damped out by thermal diffusion.

Solar radiation is 90% within the UV-to-2-micron passband of glass, so it plays by the same rules as the conductivity-dominating thermal radiation. A net flux of say, 0.4 MW/m2, onto the top of the glass melt will not penetrate any more deeply if it is the result of solar radiation or thermal radiation (aka, effective conduction.) Sunlight has relatively more short wavelength energy, of course, but under the assumption of spectrally uniform absorption in the UV-to-2-micron band, this makes no difference.

Flux is flux. That greatly simplifies modeling.


Solar heating of a glass melt from above stores heat in a stable thermocline. Later radiant cooling of the melt from above "excavates" the stable thermocline removing heat by natural convection from successively deeper and deeper levels until the whole melt is at the "empty" temperature. Temperatures in the diagram are measured relative to empty. Modeled in Energy2D.  Depth 10 m, absorption length 10 m, shown after 6 hours of solar heating.

Thursday, February 13, 2014

Effective thermal conductivity of high-purity glass melts

The effective conductivity of high-purity glass melts increases rapidly with temperature because the melt is semi-transparent to its own thermal radiation. At wavelengths shorter than 2 microns a high purity glass melt may permit its own thermal photons to travel some meters, in some cases even tens of meters, before being re-absorbed. At temperatures used for solar thermal storage, 1840 °K to 2070 °K, about a quarter to a third of blackbody radiation is in the below-2-micron passband of glass. Since effective thermal conductivity is proportional to the average distance a blackbody photon travels before it is reabsorbed, the effective conductivity of a glass melt is a function of its level of purity.



At absolute temperature T, blackbody radiation is

σT4,

where σ is the Stefan-Boltzmann constant,

σ = 5.7 E−8 W m−2 K−4 .

The derivative of blackbody flux with respect to T is:

 4σT3 W/m2-°K,

 which is the transfer between two blackbody surfaces differing slightly in temperature. At glass-melt storage temperatures only about a quarter of the blackbody radiation is in the below-2-micron passband of the melt, so we are only concerned with a differential flux of about

σT3 W/m2-°K.

If the average temperature is 2000 °K and photons in the passband travel a distance of one meter, the effective thermal conductivity (ignoring actual phonic conduction which will be relatively small) is

(5.7 E−8 W m−2 K−4)(2000 °K)3(1 m) = 456 W/m-°K

Compare the thermal conductivity of silver at room temperature is 429 W/m-°K.



Wednesday, February 12, 2014

High-purity glass melts for solar thermal storage: how pure? what cost?

High-temperature, thermal buffer storage increases the capacity factor of a solar electric plant and thus reduces the cost of thermo-mechanical conversion and electricity generation and transmission. As power sources like wind and photovoltaic—which lack access to inexpensive energy storage—become more common in the utility mix, an increasing value of high-temperature thermal storage will be permitting  time-shifting daily output to seek better electricity prices. Another value of buffer storage, which may or may not be minor, is reducing the thermal cycling of the expensive high-temperature conversion equipment. Here, I will only attempt to assess the first value, the value due to increased capacity factor

Dirk Pauschert in "Study of Equipment Prices in the Power Sector" estimates the cost of an 800 MW supercritical coal-fired power plant at $1960/kw (2008 US$). While that includes costs specifically associated with coal combustion, it also does not include the significant transmission costs associated with a remotely sited solar plant—so I will not apply a correction, $1960/kw it is.

I assume adding 20 hours of storage allows a solar plant to improve its capacity factor from 0.25 to 0.75 (without significant increased losses.) Thus a plant that would have needed 1 kw of turbine/generator capacity with no storage, only needs 0.33 kw of turbine/generator capacity with 20 hours of storage (i.e., having a capacity factor of 0.75 instead of 0.25, it has three times as long to generate the same kilowatt-hours.) That saves two-thirds of the original $1960 cost of the plant, a savings of $1313. With a heat-to-electricity conversion efficiency of 0.40, the thermal storage needed achieve that savings is:

 (20 hours) * (0.33 kwe) / (0.40) = 16.5 kw-hrth

Given that two other sources of value were ignored, a conservative estimate for the value of thermal storage is:

($1313) / 16.5 kw-hrth  =  $80 / kw-hrth.

Quoting an earlier post about thermal storage in high-purity glass melts:
From Pilon et al., the specific heat, c, of molten glass between 1000 °C and 2000 °C is about 1231 J/kgK...
Another previous post found that the practical delta-T for molten glass storage (bounded by a practical maximum temperature for the insulated roof of the furnace and the need for intense radiative transfer to the boiler tubes) is 230 °C. So a 230 °K storage range stores 230 * 1231 = 283,000 J/kg.

Converting that storage density to kw-hrth/t:

(283,000 Jth/kg) * (1000 kg/t) * (2.8 E-7 kw-hrth/Jth) = 79 kw-hrth/t

Thus the economic value of one ton of high-purity glass employed in this way is:

($80 / kw-hrth) * (79 kw-hrth/t) = $6,340 / t

This seemingly high value per ton is not out of line with more familiar high-temperature options.


Table comparing cost and performance of high-temperature thermal storage materials. Image quoted from Xiangyu Meng et al., "Theorectical Investigation of solar energy high temperature heat storage technology based on metal hydrides."


For example, the table above quotes nitrate salts as costing $1700/t, and states that they store 77 kw-hrth / m3, or 41 kw-hrth/t —about half as much thermal storage per ton—and at lower temperature than molten glass (which signifies lower conversion efficiency.)

To quote Reiner Haus et al. in "Assessment of high purity quartz resources,"

Beneficiation of raw quartz into refined high-purity products involves several refinement steps which need to be adapted to effectively minimise the specific impurities of the individual raw quartz feed to comply with stringent end-use specifications (Haus 2005). As a result, high purity quartz with total impurity levels less than 20 ppm may be achieved so creating a highly valuable raw material which commands up to 5 EUR/kg.

That is, 20 ppm high-purity silica is currently available at $7,000 / t.



Optical attenuation in glass-melt solar storage is somewhat similar to attenuation in optical fibers, about which much is known. The spectral attenuation graph for silica fiber reproduced below, shows that, barring metallic ion impurities, there are two different sources of attenuation. At short wavelengths the attenuation is mostly due to Rayleigh scattering; at infrared wavelengths, most of the attenuation is due to OH impurities, and eventually, in the longer infrared, attenuation is due to the tail of the absorption Si-O bonds of the silica itself.


Rayleigh scattering and OH absorption in silica optical fibers. Image quoted from Giusy Origlio, "Properties and Radiation Response of Optical Fibers: Role of Dopants." 
In glass-melt  thermal storage we need much of the solar energy to penetrate deep into the melt to stir its lower half. We do not need particular wavelengths reach the depths. The figure below shows that about half of the energy in solar radiation is shorter than 0.75 microns—and thus more than half of solar energy lies in the region where attenuation is mainly due to Rayleigh scattering.

Percentage of solar radiation shorter than a given wavelength. A wavelength distorted scale quoted from www.powerfromthesun.net .

That is good news because Rayleigh scattering, which is due to thermal inhomogeneities in the glass matrix itself, depends on temperature not on purity. Thus the very difficult problem of reducing the "water peaks" caused by OH ions, which demands extreme purities in glass for optical fibers, does not arise in glass melt storage. For solar glass-melt thermal storage, the easier problem of reducing metallic ion impurities, Fe in particular, reigns instead.

Quoting the Wikipedia article on Rayleigh scattering:
Rayleigh scattering is an important component of the scattering of optical signals in optical fibers. Silica fibers are disordered materials, thus their density varies on a microscopic scale. The density fluctuations give rise to energy loss due to the scattered light, with the following coefficient:[7]

\alpha _{{\text{scat}}}={\frac  {8\pi ^{3}}{3\lambda ^{4}}}n^{8}p^{2}kT_{{\text{f}}}\beta

where n is the refraction index, p is the photoelastic coefficient of the glass, k is the Boltzmann constant, and β is the isothermal compressibility. Tf is a fictive temperature, representing the temperature at which the density fluctuations are "frozen" in the material. 
Fictive temperatures for silica glass range from 1373 °K to 1773 °K (1100 °C to 1500 °C); by comparison the temperature range in a glass-melt storage is  1840 °K to 2070 °K (1570 °C to 1800 °C). Since the dependence of scattering on absolute temperature is only linear, there should be about a 25% increase in Rayleigh scattering in a thermal storage glass-melt as compared to an optical fiber.

Since we are now utilizing only half the of solar spectrum to heat the bottom of the melt, short-wavelength attenuation in the melt can only be about 75 db/km, in other words, we need about half of the short wavelength solar energy needs to reach the very bottom of the glass melt. As the figure below shows, Rayleigh scattering only rises that level in the ultraviolet.

Spectral attenuation of glass fiber materials showing short-wavelength Rayleigh scattering for silica. Quoted from Giusy Origlio, "Properties and Radiation Response of Optical Fibers: Role of Dopants." 


Attenuation due to metallic ion impurities in optical fibers. Quoted from Murata, "Handbook of Optical Fibers and Cables."
The chart above suggests that a concentration of about 60 ppb of Fe2+ could be tolerated in a glass-melt used for solar energy storage. That level of purity, 60 ppb, is still about 300 times the purity of the 20 ppm silica that is currently available at a price affordable for use as thermal storage.

Absorption by iron depends on the oxidation state of the ion, the ferrous, Fe2+, or the ferric, Fe3+. It appears that the more oxidized state, Fe3+, might be preferable for solar energy storage, because of lower absorption. Quoting from Bahman Mirhadi and Behzad Mehdikhani,"Effect of Batch Melting Temperature and Raw Material on Iron Redox State in Sodium Silicate Glasses":

Because iron has two redox states, Fe2+ and Fe3+, and these states have different colors, control of the redox condition during melting is important in adjusting the transmittance of glass in the wavelength regions of UV, visible light, and IR. When melted glass is placed in a reductive environment, the content of Fe2+ increases, and the glass turns bluish green because Fe2+ has a broad absorption band centered at 1050 nm. This absorption band is utilized in IR-cut glass such as cold-filtered glass which is produced under reductive conditions. When melted glass is placed in an oxidative environment, the iron in the glass is oxidized to the Fe3+ state and produces a yellowish color due to an absorption band which shows strong absorption below 380 nm that tails off towards longer wavelengths up to about 450 nm.


Mirhadi and Mehdikhani found that the redox ratio, Fe+2/Fe3+, increases in the solidified glass with melt temperature, reaching a plateau at about 0.3. 


Mirhadi and Mehdikhani found that the redox ratio, Fe+2/Fe3+, increases in the solidified glass with melt temperature, reaching a plateau at about 0.3. If Fe3+ is indeed strongly preferable, then 180 ppb of total iron may be acceptable in a glass melt used for solar energy storage since only a third will be in the  more absorbing Fe2+ redox state. That is still 100 times the purity of silica currently available at an acceptable price.

Tuesday, February 11, 2014

Visualizing telescopic heliostat beaming angles

Beaming angle and beam diameter visualized in comparison with the angular diameter of the full moon.
The nominal condition for a telescopic heliostat is 6x linear magnification (producing a beam diameter of six solar or lunar diameters—they are nearly the same) beamed at an angular elevation of 3° (also equal to six lunar or solar diameters.)

Solar Highbeams Target Design compared with Crescent Dunes

The Solar Highbeams Target Design compared with the Crescent Dunes Solar Energy Project. Underlying image quoted from Google Maps.


Table comparing the Solar Highbeams Target Design with the Crescent Dunes Solar Energy Project.
The ratings assume that the annual average power per mirror area of Crescent Dunes (51 W/m2) can also be achieved in the target design. Maximum boiler temperature at Crescent Dunes is 565 °C (1050 °F).

Advanced steam turbine technology: plant efficiency vs. steam temperature. Image quoted from EPRI, "Materials Technology to Enable High-Efficiency Advanced Ultrasupercritical (A-USC) Steam Power Plants"

The plot of plant efficiency vs. steam temperature above suggests that increasing steam temperature from Crescent Dunes' 565 °C (1050 °F) to an A-USC (advanced ultra supercritical) turbine's 760 °C (1400 °F), would increase plant output by about a factor of 46.5/42.3 = 1.10. That gives some leeway in rating the Solar Highbeams Target Design at 1 GW though its atmospheric turbidity losses will be greater than Crescent Dunes', and possibly its rather different shading and blocking losses will be greater as well. Eventually, thermophotovoltaic (TPV) conversion may offer even higher efficiencies.

Friday, January 31, 2014

Scaled generations of all-glass, glass-making solar furnaces


Specifications for scaled generations of all-glass, glass-making solar furnaces.

A classic science-kid's demonstration is making glass from sand with a solar furnace, and, in fact, the glass-making capacity of a solar furnace is prodigious. A solar furnace of any size, even if it is 100% glass, can make all the glass needed to replicate itself in a matter of weeks. The glass replication time of a small backyard solar furnace may be only a matter of days. More likely at large scale, the glass for a furnace would be produced by a smaller solar furnace that produces at a rate that does not outstrip the capacity to fabricate and assemble glass parts. That smaller furnace, in turn, may have been made by an still smaller furnace; and so on, through multiple generations of scale.

Starting at a very big scale (a solar furnace on 9 square miles of land) and working for the most part within areal units of the Public Land Survey System of the western United States, the table above shows specifications for six scaled generations. If these calculations can be taken seriously, the time from the completion of the room-sized 9-square meter furnace to the completion of its descendant quarter-township furnace is 6.3 years.

Thursday, January 30, 2014

Reproduction times and mass flows for all-glass, glass-making solar furnaces

All-glass, glass-making solar furnaces can be built up starting from a small seed.

When we tap power from a solar furnace (which is really what CSP power towers are,) we are tapping power from a thing that can make other things. When the day comes that solar furnace energy is cost competitive with coal for boiler-temperature heat, it will already be a factor of two or three times cheaper than any other source of high-temperature heat for making things. The economics of certain materials will be revolutionized by the availability of cheaper high-temperature heat, none more so than glass.

Laurent Pilon et al. studied thermal transfer in a glass-making furnace that produced 3.35 kg/s of soda-lime glass, with a heat transfer from the combustion space to the melt of 8.3 MW. Thus the energy intensity of this portion of the glass making process is (8,300,000 J/s) / (3.35 kg/s) = 2.5 E6 J/kg. The room temperature density of soda-lime glass is 2600 kg/m3, so, ignoring additional heat requirements in the annealing, the energy intensity of finished glass is 6.4 E9 J/m3.

The solar generating unit Ivanpah 1, produces 126 MWe at a 32% capacity factor, thus averaging 40 MWe over the course of 24 hours. At a conversion efficiency of 0.40, Ivanpah 1 must be producing thermal power of 40 MWe / (0.40 MWe/MWth) = 100 MWth = 1.0 E8 J/s .

Therefore, Ivanpah 1, relieved of its power-generating duties, could make glass at the rate of (1.0 E8 J/s) / (6.4 E9 J/m3) = 0.016 m3/s or 16 liter/s.

Ivanpah 1 has 53,527 heliostats each with a mirror area of 15 m2, giving a total mirror area of 803,000 m2.

Now comes the guessing part: if a solar furnace is made entirely of glass, and the total volume of glass is pro-rated to the heliostat mirror area, how thick will the layer be? I'm going to say 5 cm (0.05 m.) On that basis, in making the glass for an Ivanpah 2, Ivanpah 1 must make (.05 m) * (803,000 m2) = 40,000 m3 of glass.

At 16 liter/s (0.016 m3/s), that task will occupy Ivanpah 1 for (40,000 m3) / (0.016 m3/s) = 2.5 E6 s = 700 h = 29 days.

Making the glass for two copies of itself, an all-glass Ivanpah 1 solar furnace would be offline for just two months! (Of course there's a lot more to it than just making glass, but that other stuff is not Ivanpah 1's responsibility.)



Suppose each solar furnace makes the glass for two copies of itself and only afterwards gets about the business of full-time power generation. The glass for two units can be made in 2 months, but completing them will take longer, let's say it takes an additional 10 months. Setting the year clock to n = 0 when the first solar furnace starts making glass, and taking a census of solar furnaces annually, the census series will be:

1, 3, 7, 15, 31, 63, 127, 255, 511…  =  2n+1 - 1

Replicating to 300 units takes less than 8 years.




That said, it might make more sense to do things the old-fashioned way, using a special-purpose solar furnace sited near the best raw materials. An individual glass-making unit would need 300 months (25 years) to make glass for 300 units, so 3 specialized glass-making furnaces would be needed to make 300 units in about 8 years.

The quarter-township units proposed in an earlier post are considerably larger than Ivanpah 1, their thermal power is

(1000 MWe) * ( 0.75 capacity factor) / (0.40 MWe/MWth) = 1875 MWth,

which is comparable to the thermal power of a 1 GWe coal-fired plant.

That is 1875 / 100 = 19 times more thermal energy than Ivanpah 1 produces, so it yields 19 * 16 l/s  =  300 liters of glass per second. If the glass layer thickness (0.05 m) is the same, the reproduction time will be the same as calculated above (4 weeks), but the mass flows are huge: 2,800 tons of glass per hour, 24/7. Put in terms of the 120-ton capacity of one railroad coal car, that would be 570 cars—or about five, 120-car unit trains per day. That is a mass flux is needed in two directions, carrying materials in and glass parts out.




Such big mass flows need to be as short as possible. A "growing from an acorn" motto seems more appropriate than "dividing like yeast." Since a small unit can make in three years the glass for a unit 36 times larger than itself; and, since solar resource quality varies gradually over wide areas; it makes sense to site a relatively small, specialized glass-making unit where raw material resources are excellent, and let it slowly build the larger specialized power-generating unit. When the local area is considered built-out, the glass-making unit might be disassembled and relocated, or retired in-place to making spares.

To make a quarter-township solar generating unit, a one-section (one square mile) solar glass-making unit would need 9 months to make the glass; a quarter-section solar glass-making unit would need 36 months. Since it usually takes 3 to 4 years to build a conventional power plant, a quarter-section glass-making unit is probably about right.

The quarter-section glass-making unit could itself be built in 16 months by a 10-acre glass-making unit. If fabrication and assembly proceed just-in-time with the glass production, a quarter-township generating unit would be completed in 16 + 16 + 36 = 68 months (5.7 years) after the 10-acre unit starts producing glass.

In this way, the maximum mass flow, which occurs during the 36 months when the quarter-section glass-making unit is making parts for the quarter-township generating unit, amounts to 570/36 = 16 rail cars per day, but these trips are from local quarries and out to the adjoining, under-construction, heliostat field.

If the 10-acre (40,470 m2) unit can be slimmed down to a 2.5 cm glass layer—say, by using half-scale heliostats—then its mass is

40,470 m2 * (0.70 mirror/land ratio) * (0.025 m) * (2600 kg/m3) = 1800 tons

amounting to 15 rail cars to deliver it ready-to-assemble.

As a check: the trucked-in plant would make that much glass (15 rail cars) in just 2 weeks (being a slimmed-down, half-thickness design), so it can make about 1 rail car per day of glass. After successive multiplications of 16x (going up to a quarter-section, or 160 acres) and 36x (going up to a quarter-township, or 9 sections) the yield of the quarter-township unit should be (1 railcar/day) * 576 = 576 railcars/day, which checks against 570 rail-cars calculated above.

If it is necessary to reduce the freight still more, another factor of 16, down to a 2500 m2 land area (50 m x 50 m,) would just add 8 more months (since slimmed-down units replicate in just half a month.) The trucked-in weight now down to 110 tons. Another factor of 16, down to a 160 m2 land area (13 m x 13 m,) would add 8 months and reduce freight down to one load for a medium duty truck, 7 tons.







Life after Coal

Life after coal: what 300 GW of solar might look like.

Above, I envision 300 quarter-township solar generating units dispersed in the southwestern United States. Each unit would be rated about 1 GW at 75% capacity factor—effectively retiring the country's entire 300 GW of coal-fired generating capacity. The underlying solar resource map is quoted from the National Renewable Energy Laboratory.

We would rather not build these solar generating units disturbing some 3,000 miles of the Southwest's beautiful, living deserts—but, would we drastically and irreversibly alter the earth's climate rather than build them?

Wednesday, January 29, 2014

Ten things we know about telescopic heliostats

They're necessary. Ground loss—the quantity of sunlight falling between heliostats—is atrocious in current generation CSP's. Obvious in a satellite view is the fact that far more sunlight is reaching the ground than the mirrors. Land requirements are being tripled! The Second Law of Thermodynamics decrees that a heliostat without ground loss must act like a telescope, i.e., it must increase the divergence of the reflected beam while maintaining collimation (parallel rays map to parallel rays.)

Telescopic heliostats must have two mirrors. No fewer than two lenses (objective and eyepiece) compose a telescope.

Optimum power is about 6X. Magnifying the sun's disk, which is 0.5° in diameter, six times makes an intensified, but still collimated beam (or highbeam) that can be aimed at an elevation angle as small as its own diameter, 3.0°. That condition minimizes the height of the central, beam-down optics or lamp.

Central, beam-down optics are necessary. At 3.0° divergence, the highbeams are simply too spread to form a high quality focus without another optical stage.

The lamp (central beam-down optics)—shaped something like an overturned apple—will be only 60% as tall as a power tower on the same field. Larger heliostat fields are thus made practical.

The objective needs to move, the eyepiece doesn't. The objective (primary) mirror can redirect sunlight vertically to a fixed focus: the much smaller eyepiece (secondary) mirror gets to sit right there.

The objective needs to have its optical profile continuously fine-tuned to the sun's changing zenith distance. To first order, the adaptation needed is simply a thin-shell bending of the mirror.

Telescopic heliostats move in concert. The only real difference between two telescopic heliostats in a field is the azimuth aiming of their eyepieces. All the objectives could be mechanically ganged.

At at 0.70 mirror/land ratio, telescopic heliostats can be sited with negligible blocking. Surprisingly, the presence of the eyepieces adds no complication at all to heliostat siting when a phyllotaxis-based algorithm is used. The packing density achieved is more than three times that of a conventional heliostat field.

These improvements in field size and field packing make it practical to design a replicable 1 GW, 75% capacity-factor, standard solar plant covering one quarter-township (9 square miles) in the southwest U.S. The central lamp, about 190 m high, would be only 20% taller than current-generation power towers. Goodbye coal!




Monday, January 27, 2014

Quarter-township: the natural size of a replicable solar plant in the U.S.

The natural size of a replicable solar plant in the western United States is a quarter-township, or 9 square miles.

A solar power plant worthy of replication needs to be a good fit to its circumstances. In the western United States (Texas excepted) one part of those circumstances is the Public Land Survey System (PLSS,) a rectilinear grid to which property lines conform. Surveyed from reference points named for their meridians (e.g. San Bernardino Meridian, Gila and Salt River Meridian) the Public Land Survey System is a grid of six-mile by six-mile squares called townships.

In most of the American West, property lines conform to a national grid of 6 mi x 6 mi townships.
Another pre-existing circumstance for a solar thermal plant is the technology of steam-electric generating equipment. For many decades, electric utilities have preferred to build coal plants with multiple, separately-fired, turbine-generator units that are rated in the range of 600 MW to 1200 MW (see the chart below of the latest advanced high-temperature turbines installed by Siemens.)


Siemens' advanced steam turbines are commonly manufactured in the range of 600 to 1200 MW

New coal plants might operate at 80% capacity factor—i.e., their annual output is equivalent to running full power for 80% of the time—a statistic dependent not only on equipment reliability, but also on steady demand for electricity at a price that exceeds fuel costs. Capacity factors tend to come down in competition with wind turbines and other sources that do not pay for fuel, but a utility would certainly expect a new generating plant, solar or not, to be running full power most of the time. The Gemasolar plant in Spain has demonstrated that a solar plant with thermal storage can achieve a 75% capacity factor.

Taking advantage of an excellent solar climate, California's Ivanpah Solar Electric Generating System Unit #1 achieves a capacity factor of 0.32 without any energy storage at all. It has a rated power of 126 MW from a land area of 3,800,000 square meters or 33 W/m2 of land area. The mirror-area/land ratio for this plant is only 0.21. Upgrading to telescopic heliostats would bring the mirror-area/land ratio to 0.70, boosting the rated power to 33 W/m2 * 0.70/0.21 = 110 W/m2 of land area.

Based on Google imagery, the heliostat field of Ivanpah 1 is very nearly a square, 1995 m on a side, with three corner truncations, giving a heliostat field land area of about 3,800,000 square meters. This unit has 53,527 heliostats each with a mirror area of 15 square meters, giving a total mirror area of 803,000 square meters. The mirror/land ratio is 0.21.

Raising the 0.32 capacity factor of Ivanpah to 0.75 requires some amount of thermal storage (half-a-day, roughly) and a de-rating of the plant to 110 W/m2 * 0.32/0.75 = 47 W/m2 .

A quarter-township plant occupies a square of land 3 miles (4,828 m) on a side, having a land area of 9 square miles or 23,000,000 m2. Therefore, in Ivanpah's excellent solar climate, a quarter-township solar highbeams plant would be rated about 47 W/m2 * 23,000,000 m2 = 1.1 GW at a capacity factor of 75%.

Of course, the precise rating of a quarter-township plant would depend on many details including the quality of the local solar resource, but the size constraint will be the same throughout the West: a quarter-township.

In round metric numbers, a quarter-township solar plant is 5 km x 5 km. The central optics will be about 190 m tall— not that much taller than the 160 m power tower at Crescent Dunes, Nevada, or the 169 m (all-masonry) Washington Monument.


Thursday, January 23, 2014

Transflection as a negative-one refractive index lens

Negative refractive index materials have not been found in nature so far, but the equivalent effect has been produced in artificially structured materials, or metamaterials. Substituting a negative refractive index into Snell's Law of Refraction shows that the angle of refraction also becomes negative: the refracted light will be bent back to the same side of the surface normal as the incident light. For solar power optics the case of a refractive index equal to negative one is of unique interest: such a lens can have an air-filled interior and exterior (the only structured material needed is at the interface) and the throughput is potentially 100% (at least the Second Law of Thermodynamics will not offended if it is.) Lens optics with negative-one refractive index (nori for short) is both a more precise and more concise description of what I have earlier described as transflection.

In talking about the divergence pattern of optical rays passing through a point, a useful homely analogy is to place the point in question at the center of a transparent earth: then incident rays can be specified by their geographic source, i.e., the geographic point they pass through on their way toward the earth's center; and the emergent rays can be described by their geographic sink, the geographic point they pass through on their way out. I further adopt an orientation of the globe such that the surface normal at the point of interest is a ray from the earth's center toward its north pole.

Using the analogy, we can describe the action of the four basic kinds of optical surfaces—window, mirror, retroreflector, and transflector—visually in terms of where they send rays sourced by a familiar geographic area, let's say the lower 48 American states.

Rays incident on a retroreflector completely reverse course and exit through the same geographic point they entered through:


Retroreflector

Rays incident on a window pass through undeflected, so each ray exits through the antipodes of its source (which, it turns out, is not Australia after all!)


Window

Rays reflecting from a mirror (having its surface normal pointing toward the north pole) will exit at the same latitude as their source, but 180° opposite in longitude.


Mirror


Mirror (with surface normal in center of view)

Rays exiting a transflector have the same longitude as their source, but their latitude is reflected to the opposite hemisphere.


Transflector
Note the similarity of the exit patterns for a transflector and a mirror when seen in the polar view (i.e., with the mirror normal in the center of the image.) For the mirror, the relationship between the incident and emergent ray distributions is a point reflection about the mirror's surface normal. This is equivalent to a 180° rotation about the point—left and right are not reversed. For the transflector, the emergent ray distribution is a reflection over a line (the equator)—and left and right are reversed. (Of course, in one sense, a mirror really does reverse left and right, but our way of describing ray directions is producing its own reversal as the plot for a window shows.)

Reflection about a point. (Image quoted from wikimedia.)


Reflection over a line. (Image quoted from http://geometry.freehomeworkmathhelp.com)


Reflection over a line can be equivalent to reflection about a point if the object has an axis of symmetry perpendicular to the line of reflection.


As diagrammed in the image above, if a divergence pattern has an axis of symmetry that perpendicularly intersects the mirror line, then we have a special case where reflection about the point of intersection is indistinguishable from reflection over the line. Therefore, given such a symmetry in the beam divergence, a Fresnel mirror with 90° facets can act as a nori lens. The radial symmetry of the heliostat field and the central optics about a common axis guarantees that the needed symmetry will exist.


Beam divergence at the lamp (diagrammed in pink) will approximate a segment of a circle of latitude. In this view, the Fresnel mirror's surface normal will lie somewhere on the 0° line of longitude, fulfilling the constraint that it lie on an axis of symmetry for the divergence pattern. Therefore, for this divergence pattern, a Fresnel mirror with 90° facets can precisely simulate a nori lens.

 Gunnar Dolling and Martin Wegener, and R.Varalakshmi have demonstrated that POV-Ray correctly ray-traces in media with negative index of refraction.

Wednesday, January 22, 2014

Direct solar absorption and storage in high-purity glass melts

Terrestial solar spectrum superposed on the absorption spectrum of low-loss glass fibers.


At 1570 °C (a candidate "empty" temperature for a heat-storage glass melt,) the viscosity of soda-lime glass is only about half that of room-temperature honey; at 1800 °C (a candidate "full" temperature for a heat-storage glass melt,) its viscosity has fallen nearly to that of room-temperature motor oil. In a large storage pond of molten glass, convection will easily be turbulent; unfortunately, convection cannot be effectively driven by heating from the top.

Using the relations for the effective conductivity of soda-lime glass melts in Pilon et al. (which likely give values too low for high-purity melts because of the importance of the radiative contribution) the effective thermal conductivity of molten glass at 1570 °C is 95 W/m-°K (nearly twice that of room-temperature steel,) and it increases with temperature: at 1800 °C the effective thermal conductivity is 160 W/m-°K (comparable to room-temperature magnesium.) However, with a thermal diffusivity around 0.00004 m2/sec, a six-hour pulse of solar heating would only travel about 1 meter into the glass melt by conduction/radiation.

The only option for charging the thermal storage is a glass melt that is so transparent to solar radiation that much of the energy is absorbed in the lower half of the pond's depth. If half of the solar energy is absorbed in traveling to a 20 m depth, that is a loss rate of 3 dB/0.02 km = 150 dB/km. Data for very pure glass fibers (see diagram above) show that such transparency can be far exceeded for wavelengths shorter than 2 microns (which account for more than 90% of the AM 1.5 Direct solar spectrum, see diagram below.) It remains to be seen if such high-purity, transparent glass melts can be economical for direct solar absorption and storage.


Solar spectral distribution for AM 1.5 Direct (green line). Image quoted from http://pveducation.org .

Five advantages of the Solar Highbeams Project

For the same central height, a solar highbeams plant harvests than three times the land area.  (Underlying image of  Ivanpah Solar Electric Generating System quoted from the Washington Post.)


A solar highbeams plant catches more than three times the sunlight from an acre of land. (Aerial photo of  Ivanpah Solar Electric Generating System quoted from Google Maps.)


Solar high beams heliostats all move identically; this allows them to be mechanically ganged.


The focal zone in a solar highbeams plant is at ground level; this makes large-scale storage, power conversion, and industrial uses practical. (Glass furnace image quoted from Mirion Technologies.)


The rabbit advantage: because each solar highbeams power plant is a glass-making furnace as well, it can make the glass for additional plants. Making the glass for two more plants would delay power operations only a matter of months.

Tuesday, January 21, 2014

Truth in labeling: Solar multiple vs. capacity factor

It is natural to discuss a solar plant in terms of its rated output (i.e., peak electrical power,) but this often gives a false impression of the plant's economic value. For example, a utility might expect a new coal-fired plant to annually generate electric energy equivalent to its producing at full power 20 hours per day (capacity factor = 20/24 = 83%.) A solar plant in a desert climate will, over the course of a year, only produce energy equivalent to its producing at full power about 6 hours per day (capacity factor = 6/24 = 25%)

With energy storage a solar plant can operate with a higher capacity factor (saving money on some aspects of the plant) and making its rated output more directly comparable with a conventional plant. In a simplistic calculation, a 6 hr/day solar plant can become an 18 hr/day solar plant if we divert 2/3 of its output to storage. That is, by later withdrawing the stored energy we can have two more 6 hr periods of full power operation, giving a total of 18 hr/day. Our hypothetical solar plant would be said to have a capacity factor of 75%, 12 hours of storage, and a solar multiple of 3 (i.e., the ratio of its rated power without storage to its rated power with storage.)

In the real world, the above calculation would require a computer simulation, but we can borrow some real world numbers from Gemasolar, a thermal solar plant in Spain, which has 15 hours of storage and a 75% capacity factor. For obvious reasons, solar plants with a significant amount of storage prefer to advertise their annual electricity production rather than their rated power. From Gemasolar's stated annual production of 110,000 MWh/yr, and stated capacity factor of 75%, we can calculate that its rated power is:

110,000 MWhr/yr * (1/0.75) * (1/8760) yr/hr = 16.7 MW

Gemasolar has 304,750 m² of mirrors, so its rated power comes to 55 we/m² of mirror area.

Gemasolar and the Ivanpah thermal solar plant differ in detail (and Ivapah has the better solar climate,) but it is relevant to note that Ivanpah has three units rated 123 MW + 133 MW + 133 MW = 389 MW total, no storage, and 1,079,232 MWh/yr annual output—a capacity factor of 32%. In total, Ivanpah has 2,600,000 m² of mirror area, so its rated output of 389 MW comes to 150 We/m² of mirror area. That suggests that Gemasolar's solar multiple is about 150/55 = 2.7

The conclusion here is that solar plants without storage should be de-rated by approximately a factor of three before being directly compared with conventional fossil-fueled plants on the basis of rated power.




Thursday, January 16, 2014

Solar re-powering Georgia's Plant Bowen in sunny Spain

Solar re-powering Georgia Power's Plant Bowen to 3.2 GWe (75% capacity factor) in Andalucia's climate would require a storage/boiler compartment about 60% as tall as one of its cooling towers—and 130% its diameter. The central optics would be about 110% the height of its smokestacks.

In Andalucia, Spain, the location of the Gemasolar plant, only 15 hours of thermal storage (plus whatever solar multiple, or thermal down-rating, Gemasolar is using) is needed to achieve an annual capacity factor of 75% in a solar thermal generating plant.

Plant Bowen (3.2 GWe and 82% capacity factor) in Euharlee, GA, USA, is the largest coal-fired plant in the United States, and the country's largest point source of CO2 pollution. This post contemplates what Plant Bowen would look like if re-powered to run on the sun in Andalucia's sunny climate. Of course, it would be more interesting to see what Plant Bowen would look like solar-powered up to its own 82% capacity factor in northwest Georgia's own, somewhat less sunny, climate, but that would involve a detailed simulation. By figuratively moving Bowen to Spain, and adopting Gemasolar's 75% capacity factor, we can just steal data.

Quoting an earlier post:
Here are some statistics for Gemasolar gleaned from the National Renewable Energy Laboratory's site. 
Projected annual output: 110,000 MWhr/yr = 12.6 MWe  annual average.
Rated output  (calculated from the claimed 75% capacity factor): 16.7 MWe rated.
Output per mirror area (304,750 m2) :
       41 We/m2 annual average,
       55 We/m2 rated.
Land yield (1,950,000 m2; mirror/land ratio = 0.156):
        6.4 We/m2-land annual average,
        8.6 We/m2-land rated 
The 15 hours of storage based on 40% thermal efficiency is:
15 hrs * 3600 s/hr * 8.6 We/m2-land * 1/0.40 = 1.2 E6 Jthermal/m2-land 
A plant with telescopic heliostats and glass-melt storage would have some advantages over Gemasolar. Telescopic heliostats can be packed much more closely, increasing the mirror/land ratio to around 0.70, thus increasing land yield about 4.5 times that of Gemasolar. Also, because the glass melt transfers its heat to hotter steam (608°C vs. 565°C) the steam cycle efficiency can be greater, about 46% thermal efficiency as compared with 40%, a factor of 1.15 . 
So here are the Gemasolar statistics if it were rebuilt on the same plot of land with telescopic heliostats and glass-melt storage: 
Projected annual output: 110,000 MWhr/yr * 4.5 * 1.15 = 65 MWe  annual average.
Rated output  (calculated from the claimed 75% capacity factor): 87 MWe rated.
Output per mirror area (304,750 m2 * 4.5 = 1,370,000 m2) :
       41 We/m2 * 1.15 = 47 We/m2 annual average,
       55 We/m2 * 1.15 = 63 We/m2 rated. 
Land yield (1,950,000 m2; mirror/land ratio = 0.156):
        6.4 We/m2 * 4.5 * 1.15 = 33 We/m2-land annual average,
        8.6 We/m2 * 4.5 * 1.15 = 45 We/m2-land rated. 
The 15 hours of storage for the rebuilt plant becomes:
15 hrs * 3600 s/hr * 45 We/m2-land * 1/0.46 = 5.3 E6 Jthermal/m2-land 
Plant Bowen is a plant belonging to Georgia Power in Euharlee, Georgia. It is the largest coal-fired plant in the USA. It has four 800 MWe units, giving an aggregate rating of about 3.2 GWe. A telescopic heliostat / glass-melt power plant in Andalucia with 15 hours of thermal storage, having the same rated output of Plant Bowen, would occupy: 
3.2 GWe-rated / 45 We/m2-land rated = 71 E6 m2,
which is equivalent to a circle 4.8 km in radius.
The height of the central optics will be about 1/14 the field radius, or 340 m, or about 11% taller than Plant Bowen's 305 m smokestacks.
The heat flow to drive rated output is

3.2 GWe-rated * 1/0.46 = 7.0 GWthermal-rated

It remains to calculate storage and boiler dimensions. A boiler's water tube walls usually receive a thermal flux of around 250 kw/m2. Taking that value as a given, the total area of the water tube wall, SB, will be

SB = 7.0 GWthermal-rated / 250 kw/m2 = 28,000 m2.

The volumetric storage density in molten glass is

ΔT * 2300 kg/ m3 * 1231 J/kgK = ΔT * 2.8 E6 J/m3-K

Thermal storage needed for 15 hours of rated output is

7.0 GWthermal-rated * 15 hr * 3600 s/hr = 3.8 E14 J

So thermal storage volume V is

V = 1.35 E8/ΔT  m3

For a hemisphere

V = 2/3 π R3

so,

R =  (3/2π V)0.33 m

R = (3/2π * 1.35 E8/ΔT)0.33 m

R = (6.4 E7/ΔT)0.33 m

The height, H, of the water tube wall can be calculated from

2πR * H = SB


H = SB * 1/2πR = 28,000 m2 * 0.159 / R = 4,460/R m

Exploring these relations in a Numbers spreadsheet shows that Tempty = 1570 °C (1840 °K) gives a consistent solution with R = 63 m, H = 71, and the flux on the water wall tubes = 250 kw/m2. The glass temperature range from empty to full is just 230 °C. Tempty is approximately the temperature of a glass-making furnace, so it is fair to say that the thermal storage is accomplished by overheating a soda-lime glass-making furnace by about 230 °C.

By comparison, Plant Bowen has four cooling towers that are 47 m in radius and 116 m tall—so the volume of the storage/furnace compartment of a solar-fired Plant Bowen would be comparable in volume to one of its current cooling towers.

Radiative view factors in glass-melt solar storage


Radiative view factors between a cylinder and its endcaps. Diagram from Isidoro Martinez, "Radiative View Factors."

In radiative heat transfer, a view factor FA→B is the proportion of the radiation which leaves surface A and (directly) strikes surface B. In some cases there may also be an adiabatic blackbody surface C which, at thermal equilibrium, must re-radiate all of the photons it receives. In this case we can define an effective view factor  F*A→B that includes the re-radiated photons that reach B indirectly:

F*A→B = FA→B + (FA→C)(FC→B)

When all the surfaces are blackbodies (an assumption that greatly simplifies the math, and is approximately true in practice) the net radiative flux from A to B, averaged over  SA, the area of A, is:

ΦA = F*A→B * σ(TA4 - TB4),

where σ is the Stefan–Boltzmann constant, σ = 5.7 E−8 W m−2 K−4.

The corresponding net flux at surface B, ΦB, must be ΦA multiplied by the ratio of the two areas:

ΦB = ΦA * (SA/SB) = F*A→B * σ(TA4 - TB4) * (SA/SB).

When solar energy is stored in a glass melt, we can consider the free surface of the melt to be surface A (the lower cap of a cylinder,) the water wall tubes of the boiler to be surface B (the walls of the cylinder,) and the roof of the furnace to be the adiabatic surface C (the upper cap of the cylinder.)

Water wall tubes. Image quoted from http://tubeweld.com.
In the view factor diagram above, a reduced radius 'r' is related to the cylinder's radius, R, and its height, H, by:

r = R/H,

and a parameter ρ is defined to be:

ρ = (√(4 * r2 + 1) -1) / r.

The correspondences between our lettered surfaces and the diagram's numbered surfaces are:

A = 3, B = 1, C = 4.

From the diagram,

FA→B = F3→1 = ρ/2r

FA→C = F3→4 = 1 - ρ/2r

FC→B = F4→1 = F3→1 = ρ/2r

So,

F*A→B = FA→B + (FA→C)(FC→B) =  ρ/2r + (1 - ρ/2r)(ρ/2r) = (ρ/2r) (2 - ρ/2r),

and the area ratio, SA/SB, is

SA/SB = πR2 / 2πRH = R/2H = r/2.

The average flux on the water wall, ΦB, is

ΦB = F*A→B * σ(TA4 - TB4) * (SA/SB) = (ρ/2r) (2 - ρ/2r) (r/2) * σ(TA4 - TB4)

ΦB = (ρ/4) (2 - ρ/2r) * σ(TA4 - TB4)

With R = 51 m, H = 87 m, r = 0.58, ρ = 0.93, TA = 1610 °K (1340 °C) , TB = 730 °K (460 °C), as calculated in an earlier post,

ΦB = (ρ/4) (2 - ρ/2r) * σ(TA4 - TB4) = 0.26 * 367 kw/m2 = 96 kw / m2

which is not nearly the 250 kW/m2 we need to see on a water tube wall.

We need to increase radiant transfer by upping the "empty" temperature of the glass melt. This will also incidentally decrease storage density, resulting in an increase in R and a decrease in H (as calculated on the basis of 250 kW/m2.)


A spreadsheet exploring radiant transfer in glass-melt thermal storage.

Exploring these relations in a Numbers spreadsheet shows that Tempty = 1570 °C gives a consistent solution with R = 63 m, H = 71, and the flux on the water wall tubes = 250 kw/m2. The glass temperature range from empty to full is just 230 °C.